What makes dry ice safe around electronics?

Dry ice is solid CO2 — non-conductive and residue-free. Pellets sublimate to gas on contact and lift contamination off the surface. No water, no chemical film, no grit left behind to migrate into intakes.

Do you clean under raised floors?

Underfloor plenums are the core of this service. Tiles lift in zones, and the subfloor, pedestals, and cabling clean dry. Dust in the plenum rides the cooling air straight toward your equipment. Removing it at the source cuts what your filters have to catch.

How is work scheduled around uptime requirements?

Around your windows, not the crew’s. Nights, weekends, and planned maintenance windows all work. Zoned staging keeps most of the room in service while one section cleans. Multi-day jobs run to the schedule your operations team sets.

How often should a data center be cleaned?

Most sites land on semi-annual underfloor cycles with quarterly white-space passes. Dust load drives the real answer — nearby construction, filter performance, and door traffic all move it. A walk-through sets a baseline and the cycle adjusts from there.

Do crews follow site security and escort requirements?

Badging, escorts, NDAs, and background checks are standard on colocation work. Crew rosters go in ahead of the visit. Photo documentation follows house rules, including no-photo floors.

Data Center & Server Room Cleaning — Columbus, Cincinnati, Dayton, SE Ohio, WV & NKY

Q: Can you clean a data hall while it stays live?

Yes — most work runs with the room online. Dry ice is non-conductive and adds no moisture, so racks stay powered. Work stages in zones and follows your change windows. Airflow and access get coordinated with your facility team before the first tile lifts.

Q: Can you clean energized electrical equipment?

Exterior surfaces, yes. Dry ice does not carry current, so cabinet exteriors, panel faces, and switchgear housings clean without lockout-tagout. Panel-interior work is scoped separately with your site electrician to match your electrical safety program.

Q: Is this an ISO 14644 certified cleanroom service?

No — and that answer is deliberate. This service removes dust load and contamination from critical spaces using a dry, non-conductive method. Particle-count verification stays with your facility’s own monitoring program. If your spec calls for certified cleanroom protocols, raise it at the walk-through and scope gets set honestly.

Q: What about construction dust in a new data hall?

Drywall dust is the quiet killer of new builds. Construction fines settle into the subfloor, ceiling grid, and rack positions before commissioning. Post-construction cleanout pulls that load before equipment lands and warranties start. New Albany and Licking County builds sit inside standard service range.

Q: What does smoke or fire residue do to electrical gear?

Corrosive damage, and it compounds daily. Soot carries chlorides that etch contacts, busbars, and terminal surfaces over time. Dry ice removes the residue without adding moisture to already-stressed equipment. Post-incident response gets priority scheduling across Columbus, Cincinnati, and Dayton.

For data center facility managers, IT directors, and colocation operators across the central Ohio corridor. Dry ice cleaning is non-conductive and introduces zero moisture. Data halls, raised-floor plenums, and switchgear rooms cleaned without water, chemicals, or residue.

Schedule a Walk-Through Call Commercial Line: (614) 866-4484

Updated July 10, 2026 — Serving Columbus, Cincinnati, Dayton, Southeast Ohio, Northern Kentucky & West Virginia

Non-Conductive Method

Dry ice does not carry current. Cabinet and switchgear exteriors clean without lockout-tagout.

Zero Moisture

No water. No mist. Solid CO₂ turns straight to gas — nothing wet enters the room.

Tri-State Coverage

Columbus office at 171 Schofield Drive. Crews reach Cincinnati, Dayton, and Northern Kentucky.

30+ Years Restoration

Owner-operated by Rick Walker. Critical-environment cleaning anchored in restoration discipline.

What Gets Cleaned — Data Halls to Switchgear Rooms

New data hall capacity keeps rising across New Albany and the Licking County corridor. More white space to commission — and to keep clean once it runs. One vendor covers the hall, the plenum, and the electrical rooms behind it. Ready to scope a site? Schedule a walk-through, review common questions before scheduling, or call the commercial line in Columbus: (614) 866-4484.

Data Hall & White Space Cleaning

Racks. Cabinet exteriors. Cable trays. Ladder rack. Perimeter surfaces. Dust load removed without moisture or chemical film. Airflow paths stay clear and equipment stays racked.

Raised-Floor & Underfloor Plenum

Tiles lifted in zones. Subfloor, pedestals, stringers, and cabling cleared of dust and construction fines. Cooling air should move through a clean plenum, not a dirty one.

Server Rooms & MDF/IDF Closets

Campus server rooms and network closets carry years of dust nobody scheduled. Small rooms. Tight racks. Live gear. Cleaned dry, in place, without pulling a single cable.

Electrical, Switchgear & UPS Rooms

Switchgear exteriors. Panel faces. Breaker cabinets. UPS housings. Battery room surfaces. Exterior work runs without lockout-tagout. Panel-interior scope is coordinated with your site electrician.

Post-Construction Cleanout for New Builds

Drywall dust in a new data hall is a commissioning problem, not a cosmetic one. Construction fines pulled from subfloor, ceiling grid, and rack positions before equipment lands.

Scheduled Maintenance Cycles

Quarterly, semi-annual, or annual cycles matched to your dust load. Documented for facility records. Master service agreements cover multi-site portfolios across the tri-state.

From the Field — Electrical Cabinet & Control Surface Work

Representative work on electrical infrastructure across Columbus, Cincinnati, and Dayton. Post-incident jobs included — smoke and soot residue on electrical gear is corrosive and time-sensitive.

Have a hall, a closet, or a switchgear room to scope? Schedule a walk-through or call the commercial line: (614) 866-4484.

Why Dry Ice Fits Critical Environments

Water and white space do not mix. Neither do chemical residues, wet wipe-downs near intakes, or abrasive blast media. Dry ice sidesteps all four.

One method built for rooms where water is banned.

Non-Conductive

Dry ice does not carry current. Cabinet exteriors, panel faces, and switchgear housings clean without lockout-tagout. Panel-interior work is scoped with your site electrician.

Zero Moisture Introduced

Pellets are solid CO₂. On contact they sublimate to gas. Nothing wet enters the room, and humidity stays where your building controls set it.

No Chemical Residue

No detergents. No airborne chemical film. Nothing settles into intake fans or filters after the crew leaves. Surfaces are clean and dry the moment work stops.

No Media to Vacuum Out

Sand, soda, and bead blasting leave spent media in the plenum. Dry ice leaves only the contaminant it removed — collected, bagged, and taken off site.

Colocation & Wholesale

Multi-tenant halls. Badging, escorts, and access procedures followed. Work staged cage by cage around tenant requirements.

Enterprise Data Centers

Corporate-owned halls and on-prem compute rooms. Cleaning cycles built around change windows and freeze periods.

Hospital & Campus Server Rooms

Healthcare and university IT rooms. Uptime-critical gear cleaned dry, without disrupting adjacent occupied space.

Industrial Control Rooms

Plant-floor control rooms. SCADA cabinets and PLC enclosures sitting next to dusty production environments.

Telecom & Carrier Facilities

Central offices, huts, and carrier hotels. Battery rooms and rectifier bays included — exterior surfaces, dry method.

Critical environments come in more shapes than purpose-built halls. Same dry method. Same documentation. Scope adjusted to the room.

Industrial Equipment Cleaning

Production equipment, control systems, and full plant interiors. Cleaned in place across Columbus, Cincinnati, and Dayton.

Industrial equipment cleaning →

Warehouse & 3PL Cleaning

Fulfillment sites run conveyor controls, scanners, and server closets of their own. Racking and overhead steel cleaned without product damage.

Warehouse cleaning service →

Food Plant Cleaning Service

USDA and FDA fit. Poultry, meat, dairy, and packaged food plants. No chemical on food-contact surfaces.

Food plant cleaning service →

Common Questions Before Scheduling

Yes — most work runs with the room online. Dry ice is non-conductive and adds no moisture, so racks stay powered. Work stages in zones and follows your change windows. Airflow and access get coordinated with your facility team before the first tile lifts.

No — and that answer is deliberate. This service removes dust load and contamination from critical spaces using a dry, non-conductive method. Particle-count verification stays with your facility’s own monitoring program. If your spec calls for certified cleanroom protocols, raise it at the walk-through and scope gets set honestly.

Drywall dust is the quiet killer of new builds. Construction fines settle into the subfloor, ceiling grid, and rack positions before commissioning. Post-construction cleanout pulls that load before equipment lands and warranties start. New Albany and Licking County builds sit inside standard service range.

Corrosive damage, and it compounds daily. Soot carries chlorides that etch contacts, busbars, and terminal surfaces over time. Dry ice removes the residue without adding moisture to already-stressed equipment. Post-incident response gets priority scheduling across Columbus, Cincinnati, and Dayton.

Schedule a Walk-Through

Tell the estimator your facility type, white-space footprint, and any near-term events — commissioning, a fire event, or an overdue underfloor cycle. Walk-throughs across Columbus, Cincinnati, and Dayton are scheduled within 48 hours. Fixed-scope quote follows. Call (614) 866-4484 for the commercial line.

Schedule a Walk-Through Call Commercial Line: (614) 866-4484