Does the operation have to shut down during cleaning?

No full shutdown. Work is staged in zones around picking, receiving, and wave schedules. One section closes while the rest of the building runs. Third-shift and weekend windows cover high-velocity sites.

How is stored product protected during overhead work?

Zones get covered, capped, or cleared before any lift goes up. Poly sheeting and containment catch what the method pulls off the steel. Dry ice leaves no rinse water to drip onto cartons. Damage-free product is the standard the job is scoped around.

What method gets used on structural steel and conveyor electrics?

Dry ice blasting leads on steel and anything near electrics. Solid CO2 pellets turn to gas on contact, so nothing conductive or wet touches drive components. Photo eyes, motors, and control wiring stay dry.

Can conveyor and sortation systems be cleaned in place?

Yes — during planned line stops. Belts, rollers, sorters, and support steel clean where they sit. No disassembly beyond guard removal. The system runs on the next shift.

What happens after a fire or smoke event in a warehouse?

Fire residue spreads farther than the burn area. Smoke film settles on racking, steel, and stored-goods zones across the building. Decontamination is staged to get receiving bays open first. The Rickenbacker Airport facility project above ran exactly that way.

How fast can a walkthrough and quote happen?

Walkthroughs are scheduled within 48 hours of inquiry. A fixed-scope quote follows for Columbus, Cincinnati, and Dayton sites. Post-incident response moves faster — same-week mobilization for active smoke or soot events.

Do you clean food-grade storage areas?

Ambient warehouse zones, yes — regulated food-contact areas are a different scope. Storage held to USDA or FDA spec belongs under the food plant cleaning service. Dry and ambient distribution space at food sites cleans under this service.

Warehouse & 3PL Cleaning Service — Columbus, Cincinnati, Dayton, SE Ohio, WV & NKY

Q: Can racking be cleaned without emptying the shelves?

In most bays, yes. Product gets covered or shifted within the zone, not pulled from the building. Fully loaded selective rack cleans face by face. Bays with open or fragile product get cleared first.

For distribution center GMs, 3PL ops directors, and industrial property managers across the I-70/I-71 corridor. Racking, overhead steel, and conveyors cleaned without product damage. Work staged in zones, so freight keeps moving.

Request a Facility Quote Call Commercial Line: (614) 866-4484

Updated July 10, 2026 — Serving Columbus, Cincinnati, Dayton, Southeast Ohio, Northern Kentucky & West Virginia

No Product Damage

Loaded racking cleaned face by face. Product covered or cleared before any lift goes up.

Zones, Not Shutdowns

Work staged bay by bay around picking and receiving. Freight keeps moving through the building.

Tri-State Coverage

Columbus office at 171 Schofield Drive. Crews across Cincinnati, Dayton, and Northern Kentucky.

Three Cleaning Methods

Dry ice blasting, controlled power washing, and steam. Matched to the surface and the zone.

What Gets Cleaned in a Warehouse or 3PL Facility

Structural and high-level cleaning for distribution and fulfillment sites across Columbus, Cincinnati, and Dayton. Everything above the floor line — racking, steel, deck, and the systems that move freight. Clean structure protects productivity, safety, and appearance.

Need a scope for your building? Request a facility quote, check common questions from operators, or call the commercial line: (614) 866-4484.

Racking & Shelving Systems

Selective rack. Pallet flow. Cantilever. Mezzanine shelving. Dust, soot, and grime lifted off uprights and beams without emptying most bays. Load labels and safety signage stay legible.

Overhead Steel, Joists & Deck

Structural steel, bar joists, deck, and purlins. Dust load on overhead steel is a housekeeping citation waiting to happen. Boom lifts reach it without scaffolding or shutdown.

Conveyor & Sortation Systems

Belts, rollers, sorters, and support steel. Dust and debris pulled off drive components during planned line stops. The system runs again on the next shift.

Walls, Ceilings & Dock Areas

Interior walls, ceiling panels, dock doors, levelers, and seals. Diesel film and dock grime pulled off the areas customers see first. The building shows well on every audit walkthrough.

Post-Incident Fire & Smoke Decontamination

Fire residue, smoke film, and soot across racking and stored-goods areas. Time-sensitive decontamination staged to get bays receiving again. Restoration discipline applied at warehouse scale.

Scheduled Cycles for Audits & Lease Turnover

Annual or semi-annual structural cleaning cycles. Timed to customer audits, fire inspections, and lease-end walkthroughs. Every cycle documented with photos for the file.

Rickenbacker Airport Facility

Proof from the region’s own freight hub. A fire pushed smoke residue across a full warehouse envelope at the Rickenbacker Airport facility south of Columbus.

Boom lift work mid-project. The restored half of the wall meets the sooted half — same surface, one pass apart.

Facing a post-incident cleanup, or planning ahead of one? Call the commercial line: (614) 866-4484.

A worker in a boom lift pressure washes a large industrial wall, revealing a clean, light

The Situation

Smoke and soot settled far beyond the burn area. Walls, structural steel, and high surfaces carried residue across the building envelope. The facility sits inside an active air-freight operation.

The Approach

Boom lifts, staged zones, wall by wall. Methods matched to each surface so the structure came clean without saturating it. Freight operations continued around the work zones.

The Result

The photo shows the line. Sooted surface on one side, finished surface on the other — the same wall, cleaned in place. The building returned to service with finishes intact.

Cleaning Methods Matched to the Surface

One crew. Three methods. One quote.

Three specialty methods cover warehouse structural work. The crew picks by surface, contaminant, and how fast the zone needs to reopen. A walkthrough confirms method fit and zone staging before anything is scheduled. How dry ice blasting works covers the lead method in detail.

Dry Ice Blasting

No water. No chemicals. Non-conductive.

The lead method for racking, structural steel, and anything near conveyor electrics. Nothing wet drips onto product below.

Controlled Power Washing

Where water is fine.

Dock aprons, masonry, and exterior surfaces. Contained and staged away from stored goods.

Steam Cleaning

Heat cuts the buildup.

Grease and grime on dock equipment and material-handling gear. Minimal water. No harsh chemical residue.

Industrial Equipment Cleaning

For the production side of the operation. Presses, machining lines, and control systems cleaned in place without tear-down.

Industrial equipment cleaning →

Data Center & Server Room Cleaning

ESD-safe and dry. For server rooms, data halls, and raised-floor spaces inside larger facilities.

Data center cleaning service →

Commercial Kitchen Hood Cleaning

NFPA 96 hood and duct cleaning for cafeterias and food service inside commercial buildings.

Commercial kitchen hood cleaning →

Common Questions from Warehouse & 3PL Operators

In most bays, yes. Product gets covered or shifted within the zone, not pulled from the building. Fully loaded selective rack cleans face by face. Bays with open or fragile product get cleared first.

Scheduled cycles are built backward from the date that matters. Customer audits, fire inspections, and lease turnovers all work the same way. The job finishes with photo documentation for the file. Recurring agreements lock the slot before peak season fills the calendar.

Request a Facility Quote

Tell the estimator your building size, racking layout, and the date that matters — audit, lease-end, peak season, or post-incident reopening. Walkthroughs in Columbus, Cincinnati, or Dayton are scheduled within 48 hours. A fixed-scope quote follows. Call (614) 866-4484 for the commercial line.